An automatic biscuit making machine is, in industrial terms, a complete line whose stations are linked and run under one control system. Dough moves from mixer to packing without being handled between steps. "Fully automatic" is used loosely in the market. This article explains what it should mean on a factory line, what the control system actually holds steady, and what operators still do.

What makes a biscuit making machine automatic?

A biscuit making machine is automatic when its stations are synchronised under a single control system, so product moves through mixing, forming, baking, cooling and packing without manual transfer. The operator sets the recipe and line speed, and the system holds them across the line.

On Sunbeam's soft dough lines, that system is a PLC with a touchscreen HMI. It supports online diagnostics. On hard dough lines, PLC control with digital speed control covers line speed and process settings, at belt speeds up to 120 metres a minute.

What does the control system hold steady on an automatic line?

The control system holds speed and synchronisation between stations, so the mixer, forming section, oven and cooling conveyor run at matched rates. On a hard dough line it also holds sheet thickness through the gauge rollers, which sets piece weight and bake.

Sunbeam introduced India's first PLC with AC drives on biscuit machinery in 2000. Since 2020, servo gap adjustment on the final gauge roller has been standard, as recorded in the company's journey timeline. The final gauge roller sets the sheet the cutter sees, so holding that gap holds the product.

Control pointWhat it holds steadyWhy it matters
Line speed (PLC)Matched rates between mixer, forming, oven and coolingPrevents product build-up or gaps between stations
Final gauge roller (servo gap)Sheet thickness into the cutterSets piece weight and bake consistency on hard dough
Dough temperatureCondition of soft dough through the lineSoft dough carries more fat and sugar and is sensitive to heat
Oven zonesTemperature in each section of the ovenLets each part of the bake run at its own setting
Scrap returnHard dough off-cuts fed back to sheetingKeeps material loss down without manual handling

What do operators still do on a fully automatic biscuit line?

Operators still set recipes, check product and run changeovers and cleaning. Automation holds the settings, but people verify that the biscuit coming off the line is the one specified.

On Sunbeam's soft dough lines, piece weight is checked by sampling unbaked and baked pieces across the line's width. Operator training is part of every turnkey handover, because a fully automatic line still depends on the people who run it. The checks for holding piece weight are set out in How to Control Piece Weight on a Rotary Moulder.

Does automation make a biscuit line harder to clean?

It should not, if hygiene is designed in from the start rather than added around the drives. Chainless drives, stainless covers and open frames reduce the places where dough and debris collect.

Sunbeam built its first chainless rotary moulder in 2004 and launched India's first paint-free, all-stainless machines in 2006. In 2020 it added antimicrobial, track-free TPE belts under its SH2.0 Super Hygiene series. The reasoning behind each is in Designing Hygiene In.

Is a fully automatic biscuit line right for a smaller plant?

Yes, at the right size. The smallest standard Sunbeam line, at 250 kg/hr, is built for a regional brand moving off semi-automatic equipment.

How to Size a Biscuit Line places the 250 kg/hr band with exactly that buyer, and 1,000 kg/hr with brands on established regional distribution. The deciding question is saleable output per shift, not whether the plant is large enough for automation.

Written by the engineers who design and commission Sunbeam biscuit lines. Sunbeam has designed and manufactured biscuit machinery in Bollaram, Hyderabad, since 1993, with installations across India, Africa and the Middle East.

Tell us what biscuit you produce, the capacity you require and the space available in your plant. Speak to an Engineer.