"Biscuit machine" covers three very different things: a hand press for a home kitchen, a standalone machine for a small bakery, and an industrial production line for a biscuit factory. This article explains how to tell them apart. It then sets out the machines that make up an industrial biscuit line, the kind Sunbeam designs and builds.

What is a biscuit machine?

A biscuit machine is any equipment that shapes, bakes or handles biscuits, from small manual presses to continuous lines that produce tonnes an hour. For a factory, the useful meaning is narrower: a set of synchronised machines that mix, form, bake, cool and pack biscuits in one flow.

That set is a biscuit line. Sunbeam's soft dough lines run from 250 kg/hr to 2,500 kg/hr at working widths from 800 mm to 1,800 mm. That scale is what separates industrial equipment from bakery equipment.

What separates a bakery biscuit machine from an industrial line?

A bakery machine does one job in batches, with people moving product between steps. An industrial line runs continuously, with every stage linked and controlled together, and the difference shows in output, control and the oven.

On an industrial line, a PLC with a touchscreen HMI sets and holds line speed and process settings across all stations. Baking takes place in a continuous tunnel oven, whose conveyor speed sets the baking time, rather than in a batch oven. Capacity is quoted in kilograms per hour of saleable output, so a line can be sized against a plant's distribution plan.

Which machines make up an industrial biscuit line?

An industrial biscuit line is built from a mixer, a forming section, a tunnel oven, a cooling conveyor and a packing interface. The forming section is the part that changes most between biscuit types.

MachineJob on the lineUsed for
Horizontal dough mixerMixes dough to a controlled consistency and temperatureAll biscuit types
Rotary moulderPresses short dough into engraved dies to form each pieceSoft dough: cookies, butter, glucose, cream shells, milk biscuits
Sheeter and laminatorRolls elastic dough into a sheet and folds it into layersHard dough: crackers, cream crackers, laminated biscuits
Gauge rollersReduce the sheet to its final thicknessHard dough
Rotary cutterCuts pieces from the sheet; scrap returns to sheetingHard dough: Marie, crackers, soda biscuits
Tunnel ovenBakes pieces continuously on a band or meshAll biscuit types
Cooling conveyorBrings biscuits to packing temperatureAll biscuit types

The hard dough machines listed above make up the forming section of Sunbeam's hard dough lines. These run at belt speeds up to 120 metres a minute and laminate up to eight layers.

Which biscuit machine does each type of biscuit need?

Soft dough biscuits need a rotary moulder, and hard dough biscuits need a sheeting, laminating, gauge rolling and cutting section. Everything before and after forming is shared, which is why a plant that makes both can run them on one line.

A flexi line keeps both forming arrangements on the line in registration and changes from one to the other in about 15 minutes. Sunbeam built its first flexi-line forming section in 1997. The engineering difference between the two dough families is covered in Hard Dough and Soft Dough: What Actually Changes on the Line.

What should an industrial biscuit machine be made of?

Every food-contact surface should be non-toxic, non-corrosive and easy to clean and disinfect, the standard the FSSAI applies in its hygiene rating checklist for bakeries. In practice it means stainless steel wherever dough or biscuits touch the machine.

Sunbeam machines are built in food-grade AISI 304/316 stainless steel, with incoming metal checked spectrographically. India's first paint-free, all-stainless biscuit machines came from Sunbeam in 2006, as recorded in the company's journey timeline.

How do you choose the right biscuit machine for a factory?

Start from the biscuits you will make and the saleable output you need, then choose the line, not the individual machine. The forming section follows from the product, and the width and oven follow from the output.

How to Size a Biscuit Line sets out the method, from monthly tonnage to kilograms per hour. For the machine families themselves, see Sunbeam's full range of biscuit making machines.

Written by the engineers who design and commission Sunbeam biscuit lines. Sunbeam has designed and manufactured biscuit machinery in Bollaram, Hyderabad, since 1993, with installations across India, Africa and the Middle East.

Tell us what biscuit you produce, the capacity you require and the space available in your plant. Speak to an Engineer.