Biscuit manufacturing in India runs on continuous production lines. Dough is mixed, formed, baked in a tunnel oven, cooled and packed without leaving the line. This article explains each stage as the engineers who design and commission those lines see it. It also covers what changes between biscuit types and what a plant has to plan for before it buys machinery.
What does biscuit manufacturing in India involve today?
Biscuit manufacturing in India is a large, growing food category, made on industrial lines that turn flour, fat and sugar into packed biscuits in one continuous flow. IMARC Group puts the India biscuits market at USD 5.0 billion in 2025, rising to USD 5.5 billion in 2026.
What counts as a biscuit is set by regulation. Under the FSSAI's biscuit standard (sub-regulation 2.4.15, as amended in March 2021), a biscuit is a baked product, leavened or non-leavened, coated or uncoated, and may be centre-filled partially or wholly. That one definition covers cookies, crackers, Marie, cream sandwiches and wafers. These products behave very differently on a line.
What are the stages of the biscuit manufacturing process?
An industrial biscuit line has five stages: mixing, forming, baking, cooling and packing. Each stage is a separate machine or group of machines, synchronised so that dough enters at one end and packed product leaves at the other.
Sunbeam's soft dough lines are built as exactly these five stations, at capacities from 250 kg/hr to 2,500 kg/hr. The stages, and the machines that carry them out, are:
| Stage | What happens | Typical machines |
|---|---|---|
| Mixing | Flour, fat, sugar and water become a dough of controlled consistency and temperature | Horizontal dough mixer |
| Forming | Dough becomes individual pieces of set weight and shape | Rotary moulder (soft dough); sheeter, laminator, gauge rollers and rotary cutter (hard dough) |
| Baking | Pieces travel through a continuous oven on a band or mesh | Tunnel oven, electric, oil, gas or LPG fired |
| Cooling | Biscuits set and reach packing temperature | Cooling conveyor |
| Packing | Biscuits are stacked, counted and wrapped | Packing interface and packing machines |
How does the process differ for soft dough and hard dough biscuits?
Soft dough and hard dough biscuits share mixing, baking and cooling, but need different machines from the forming section onward. Soft dough is short and rich, so it is moulded; hard dough is elastic and low in fat, so it is sheeted, laminated and cut.
Soft doughs carry more fat and sugar and are sensitive to heat, which is why dough temperature is managed through the whole soft dough line. Hard dough products such as crackers, Marie and soda biscuits go through sheeting, laminating, gauge rolling and rotary cutting on a hard dough line, with sheet thickness set between 0.4 mm and 15 mm and up to eight laminated layers. A fuller comparison is in Hard Dough and Soft Dough: What Actually Changes on the Line.
What does the oven do on a biscuit line?
The oven bakes the formed pieces as they travel through it on a conveyor band, so the line never stops for a batch. A tunnel oven bakes continuously rather than in batches, with different conveyor speeds giving different baking times.
Heating can be direct-fired, with burner gases passing through the baking chamber, or indirect, with heat exchangers outside it and heated air circulated in. Both designs are built with multiple zones. Sunbeam lines are offered with electric, oil, natural gas or LPG ovens. The choice of fuel and layout for export plants is covered in Choosing a Biscuit Tunnel Oven and Cooling Layout.
What hygiene rules apply to biscuit machinery in India?
Food-contact machinery in India must be made of non-toxic, non-corrosive material that is easy to clean and disinfect, and it must be cleaned to a documented schedule. Both requirements appear in the FSSAI's hygiene rating checklist for food service establishments and bakeries.
For a biscuit line, this points to stainless steel in food-contact areas and to designs without hidden places for dough to collect. Sunbeam builds in food-grade AISI 304/316 stainless steel and has offered paint-free, all-stainless machines since 2006. The design choices behind that are set out in Designing Hygiene In.
How large a biscuit line does a plant need?
A biscuit line should be sized from saleable output per shift, not from a sales target or the rated figure on a quotation. In practice, a well-run plant plans at 70 to 85 percent of rated capacity across a shift.
The method in How to Size a Biscuit Line starts from monthly saleable tonnage. It divides that by working days and shifts, then adds allowances for changeovers, cleaning, start-up and shutdown. Three bands cover most Indian plants. A 250 kg/hr line suits a regional brand moving off semi-automatic equipment, 1,000 kg/hr suits established regional distribution, and 2,500 kg/hr suits national distribution or contract manufacturing.
What should a plant plan before it buys biscuit machinery?
A plant should fix three things before it asks for machinery quotations: the biscuits it will make, the saleable output it needs, and the floor space and utilities it has. Every other decision in the line, from forming section to oven fuel, follows from those three.
Sunbeam asks buyers for a dimensioned floor plan and a utility schedule at the start of a turnkey project, because machinery selection and layout are planned together. The documents to prepare are listed in What to Put in a Machinery RFQ.
Written by the engineers who design and commission Sunbeam biscuit lines. Sunbeam has designed and manufactured biscuit machinery in Bollaram, Hyderabad, since 1993, with installations across India, Africa and the Middle East.
Tell us what biscuit you produce, the capacity you require and the space available in your plant. Speak to an Engineer.
